Modular, ultra stable platform for binoculars and ballistic tools
Patented OptikFit technology allows you to adjust the harness to your optics, simply adjust the front hood height, shock cord tension system and back panel height for a true custom fit
3-Layer HydraShield waterproof, windproof and breathable
Weight: Regular - 9.4oz
Weight: Large - 10.4oz
Made in the USA
Product Description
The Sentinel Bino Harness is a feature-rich optics system specialized for hunting, long-range shooting, and military applications. Built to be a modular, ultra-stable platform for binoculars and ballistics tools, the Sentinel system features a full kit of accessories that easily integrate with the harness for secure carry of rangefinders, wind meters, ammunition, and more. The Sentinel system also leverages Patented OptikFit technology for a custom optics fit and a 3-layer HydraShield laminate for complete waterproof protection.
Follow these steps to ensure you get the right size harness for your binoculars. Measurements are in Inches.
Measure your binocular's height to find the correct fitting row for Measurement (A). Round to the next larger measurement if between measurements.
Set hood height on front Velcro per measurement (B) on the chart. Measure from the Bottom of the Velcro loop.
Set back plate height per measurement (C) on the chart. The top of of the plate should be approximately .75" below eye cup height. Measure from top of Velcro loop.
Tighten shock cord on the bottom of the harness to snug top of hood. Shock cord should only have minimal tension. If the hood is too stiff on opening, loosen the shock cord, adjust tension for a smooth operation.
(A) Bino Height
(B) Front Hood Height
(C) Back Plate Height
5.5
0
.5
5.75
.25
.75
6
.5
1
6.25
.75
1.25
6.5
1
1.5
6.75
1.25
1.75
7
1.50
2
7.25
1.75
2.25
Large Bino Harness
Follow these steps to ensure you get the right size harness for your binoculars. Measurements are in Inches.
Measure your binocular's height to find the correct fitting row for Measurement (A). Round to the next larger measurement if between measurements.
Set hood height on front Velcro per measurement (B) on the chart. Measure from the Bottom of the Velcro loop.
Set back plate height per measurement (C) on the chart. The top of of the plate should be approximately .75" below eye cup height. Measure from top of Velcro loop.
Tighten shock cord on the bottom of the harness to snug top of hood. Shock cord should only have minimal tension. If the hood is too stiff on opening, loosen the shock cord, adjust tension for a smooth operation.
