Stone Glacier R3 7000 Expedition Pack
Log in to earn 805 points with purchase
- Compatible with R3 Lid (included)
- Belt size - Medium and Large
- Top Velcro access for radio antenna and or comms cable
- Internal Velcro loop patch
- Compatible with SG Camp Pocket, Swing Out Pocket, and other modular attach pockets
- 2 side stretch pockets for quick external storage
- Full top panel zip for access to main compartment
- Top external zipped pocket
- Belt attachment compatible
- Hydration Compatible (Hydro Sleeve - Sold Separately)
- Weight (bag only): 2 lbs 14.5oz
- Weight (on medium R3 Frame): 5 lbs 15oz
- Capacity: 7000 cubic inches / 114 liters
- Capacity with R3 Lid & Side Bags: 8500 cubic inches
- Cubic inches in Bivy Mode: 5100
- Fabric: 500D Cordura (bag), Xpac (load shelf)
- Heavy duty YKK #10 Zipper
- Heavy Duty 1" Duraflex military approved buckles and webbing
- 150+ pound load rating
- R3 lid-compatible
- R3 Side Bag-compatible
- Berry Compliant
- R3 Bags are only compliant with the R3 Frame
R3 - Response | Recon | Rescue. The R3 7000 is a lightweight expedition pack designed and built to meet the demands of reconnaissance military operations. The new R3 7000 includes a top Velcro access for a radio antenna or comms cable, two internal Velcro loop patches for the SG Cordura Camp Pocket or other modular storage, and two side stretch pockets for quick external storage. The 7000 also integrates with the color-coded buckles on the R3 Frame to quickly attach and separate the bag from the frame to utilize the 2,500+ cubic inch load shelf for added volume capabilities. A heavy weapon system with multiple positioning options is integrated into the frame for secure-and-supported carry of long-range large calibers with large optics. As part of the modular R3 military pack line, the 7000 is compatible with the R3 Side Bags to further extend the pack’s capacity to 8500 cubic inches for longer trips and missions that require bulkier cold-weather gear.
Stone Glacier - Waist Belt Sizing
- Small belts are measured 28" - 30"
- Medium belts are measured 31" - 36"
- Large belts are measured 37" and above
Stone Glacier - Proper Pack Fitting
When fitting a Stone Glacier Pack, there are three things we look for in a perfect fit. (A) First, we always want the belt centered on the tip of your hip bone. Belt positioning can be altered by adjusting the attachment height of the shoulder straps. (B) Next, we want to make sure the shoulder straps make solid contact with the backside of our shoulders. (C) If a gap is present between the shoulder strap and shoulder, it often can be eliminated by loosening the load lifters. Lastly, we want to aim for the color transition on the shoulder straps (D) to land on, or close to, your collarbone. Placement can be altered with a combination of adjusting the attachment height of the shoulder straps on the frame sheet and loosening of load lifters.
Learn From the Best
SG Founder and Lead Designer Kurt Racicot walks us through how to properly fit a Stone Glacier backpack.